The Home Runner RBI is an affordable and flexible stand-alone home automation solution for any INSTEON / X10 installation. Whether you are a home automation integrator or a DIYer, you will enjoy the ease with which programming and discovering of INSTEON devices is accomplished. You can set up timer events and custom event triggers, as well as monitor and control all the INSTEON-compatible devices in your home from any web-browser anywhere in the world! Now you can check if your garage door was left open and close it from your computer at the office or any web enabled location.
Power Input: 9 - 12VDC @ 300mA (not required with model 2412S PLM) Front LEDs: “SEND” (Green), “RECV” (Yellow), “RUN” (Red)
Rear Connections: “NETWORK” (Ethernet, RJ45), “SERIAL” (RS232, RJ21), “PLM” (Power Line Modem, RJ45), “12VDC IN”
Stop Bit Delay Timers: 16 simultaneous (shared) Dynamic Timers: 32 Variables: 256 Flags: 256 X-10: 256 Insteon Devices: 1024
Total System Links: 5000
Insteon Scenes: 500 max. History Log: 512 lines (FIFO) Message Log: 128 lines, 32 characters/line (FIFO)
Total User Memory: 2.9 MB
Maximum Events: 1024 or 50,000 bytes maximum compiled
Maximum Then Macros: 256 or 20,000 bytes maximum compiled Dimensions: 5.5" x 4" x 1.5" Net Weight (controller only): 0.5 lbs.
Required Operating System: Windows XP, Vista or 7 (32- or 64-bit)
Required Available Disk Space: 3 MB